SiloTreat tiles
Description








SiloTreat® Tiles is a product based on oligomeric propyl-siliconate/silicate for hydrophobization and consolidation (strengthening) of tiles.
After treatment with SiloTreat® Tiles, the surface tension increases and water does not penetrate deep into mineral surfaces, enhancing their water resistance, strengthening them, and preventing their deterioration.
Areas of application
- Low-fired clay tiles
Application method






- SiloTreat® Tiles is effectively applied by low-pressure spraying with a fan nozzle (HVLP) or by dipping.
- When spraying, apply the product continuously in horizontal lines from bottom to top without overlapping.
- For hydrophobizing tiles and roof slates before installation (in the case of new construction or major repairs), the dipping method can be used for applying SiloTreat® Tiles*.
- The product must be protected from liquids for at least 4 hours after application.
*Tiles are fully submerged in a container with SiloTreat® Tiles for a short time (from 10 seconds to 2 minutes) to absorb the product. They are then drained over the container and left to dry.
Consumption
- Tiles
- 200 - 450 ml./m2*
*Average consumption rate - the quantities indicated are indicative, as the consumption rate for each specific application depends on the absorptive capacity of the surface.